GC Detectors
Gas chromatography detectors (GC detectors) identify solutes as they exit the chromatographic column. As solutes are eluted from the gas chromatography column they interact with the detector. The GC detector converts this interaction into an electrical signal that is sent to the data system. The magnitude of the signal is plotted versus time (from the time of injection) and a chromatogram is generated. GC detectors use one of several technology types to identify solutes as they exit the column. These methods include thermal conductivity, flame ionization, atomic emission, electron capture, photoionization, flame photometric, chemiluminescence spectroscopy, and nitrogen phosphorous.
Thermal conductivity GC detectors consist of an electrically heated wire or thermistor. The temperature of the sensing element depends on the thermal conductivity of the gas flowing around it. Changes in thermal conductivity, such as when organic molecules displace some of the carrier gas, cause a temperature to rise in the element, which is sensed as a change in resistance.
Flame ionization GC detectors consist of a hydrogen / air flame and a collector plate. The effluent from the GC column passes through the flame, which breaks down organic molecules and produces ions. The ions are collected on a biased electrode and produce an electric signal.
Atomic emission GC detectors simultaneously determine the atomic emissions of many of the elements in analytes that elute from the GC capillary column. As the eluant comes off the capillary column it is fed into a microwave powered plasma (or discharge) cavity where the components are destroyed and their atoms are excited by the energy of the plasma. The light that is emitted by the excited particles is separated into individual lines via a photodiode array.
Electron capture detectors use a radioactive Beta emitter (electrons) to ionize some of the carrier gas and produce a current between a biased pair of electrodes. When organic molecules contain electronegative functional groups, such as halogens, phosphorous, and nitro groups pass by the detector, they capture some of the electrons and reduce the current measured between the electrodes.
Photoionization GC detectors use ultraviolet light as a means of ionizing an analyte exiting from a GC column. Electrodes collect the ions produced by this process. The current generated is therefore a measure of the analyte concentration.
Chemiluminescence spectroscopy detectors use quantitative measurements of the optical emission from excited chemical species to determine analyte concentration. Usually the emission is measured from energized molecules rather than excited atoms. The bands of light determined by this technique emanate from molecular emissions and are therefore broader and more complex than bands originating from atomic spectra.
Nitrogen phosphorous GC detectors burn the compound in plasma surrounding a rubidium bead supplied with hydrogen and air. Nitrogen and phosphorous containing compounds produce ions that are attracted to the collector. The number of ions hitting the collector is measured and a signal is generated.
In specifying a GC detector the detection limit or sensitivity, dynamic range and temperature range are all important parameters. GC detectors also have important parameters that are specific to each technology type.
